This product uses the high quality water-based emulsion, viscosity resin, a variety of additives, through rigorous scientific formula and advanced production process carefully made of a high-performance adhesive.
1, Appearance: milky white viscous liquid
This product is suitable for a variety of Kraft adhesive, copper jam on the mounted.
3, the product features:
(1) brushing good performance, the whole stick time ten minutes, four hours to fully cure.
(2) film flexibility, a good variety of Kraft adhesive properties.
(3) The product good heat resistance, cold resistance, adhesion good product baking 72 hours or frozen at -20 ℃ 60 ℃ 72 Hour
bonding strength remains the same, the product is not explosive, film is not brittle.
4, the construction method: Hand brush, paste Universal machine
5, the technical parameters:
(1) Solid content ≥50%
(2) Viscosity = 5000-6000mpa.s
(3) pH = 5-6
(1) the product is too large for the stiffness, the press after bonding requires at least half an hour, and the pressure should be sufficient so that the two surfaces to be glued can be sufficiently bonded.
(2) the FDA product quality involves many factors, you should use depending on the product prior to the specific circumstances of the trial conducted before mass production after passing.
7, storage and transportation:
(1) This product should be sealed in a cool dry place, storage temperature is 5-35 ℃ is appropriate, effective storage for one year, over the storage period can still be used as passing inspection.
(2) This product is an aqueous dispersion, a non-dangerous goods, according to general goods for transportation.
The company is not responsible for the
performance, effect and applicability of the goods due to the use, operation,
storage and transportation of the goods.No staff or representative of the
company has the right to amend or waive this clause. If your company fails to
accept the exemption clause, please return the original shipment.
The company is not responsible for the performance, effect and applicability of the goods due to the use, operation, storage and transportation of the goods.No staff or representative of the company has the right to amend or waive this clause. If your company fails to accept the exemption clause, please return the original shipment.